Radio Shack 43-3856 - Manual (Page 12)

Memory Diali
ng
12
F
LASH AND
C
ALL
W
AITING
If you have “Call Waiting” service and a call waiting
tone sounds while you are on a call, press
TALK/
FLASH to accept the waiting call. There is a short
pause. Then you will hear the new caller. To return
to the original caller, press
TALK/FLASH again.Ô
MEMORY DIALING
S
TORING
P
HONE
N
UMBERS IN
M
EMORY
Memory Dialing allows you to dial a number using
just a few key presses. Your phone stores up to ten
numbers in the handset. Ô
1. When the phone is in the standby mode, press
MEM . The TALK/BATT LOW LED flashes.
2. Enter the phone number, up to 20 digits. If a
pause is needed during the dialing sequence,
press
PAUSE/REDIAL to insert a pause. Each
pause counts as a digit and represents a two
second delay in time between digits as they are
sent.
3. Press MEM again.
4. Enter the memory location (0 - 9) on the
keypad. A tone indicates that the number is
stored. If you enter a number in a location that
has a previously stored number, it will overwrite
the existing number without warning.
M
AKING
C
ALLS WITH
M
EMORY
D
IALING
1. Press TALK/FLASH . Then press MEM . Ô
2. Enter the memory location (0 - 9) on the
keypad. The stored number is automatically
dialed. Ф
Ф
NOTES
Ô
Flash and Call Waiting
You must subscribe
through your local
telephone company to
receive Call Waiting
Service.
Storing Phone Numbers
in Memory
• In memory dialing
operation, you must
press a key within 30
seconds. Otherwise, an
error tone will sound and
the phone will return to
standby.
If you return the handset
to the base, the phone
will also return to
standby.
• The pause feature is
useful for long distance
calling, credit card
dialing, or sequences
that require a pause
between digits.
Making Calls with
Memory Dialing
• To exit the memory
function without dialing,
press
END . The handset
returns to standby.
• If you select a memory
location that does not
have a stored number,
an error tone sounds
and the phone will not
dial.
43-3856.FM Page 12 Saturday, February 28, 2004 6:45 PM