Runco CL-510LT - Manual (Page 8)

1. Overview
Runco CL-510/ CL-510LT User’s Manual
5
Controls and Functions
❚ Control Panel
1. POWER LED
Indicate power status
■ Orange when the AC power cord is plugged into the wall outlet (standby mode). Once in the
standby mode, you can turn on the projector by pressing the ON key on the remote control for
ONE second.
■ Green when the power is turned on (operational mode).
■ Flashing Orange for the first 45 seconds after power-up indicating that the lamp is warming up.
■ Flashing Green for 90 seconds after the projector is powered off indicating that the lamp is cooling
down.
2. LAMP LED
Indicates the status of lamp
■ Red when the lamp has developed a problem. Please contact your Runco Dealer for assistance.
3. ZOOM RING
Adjust the size of the image
■ Rotate right to enlarge the image, and rotate left to make the image smaller.
4. FOCUS RING
Adjust the focus of the image
■ Rotate the focus ring right or left to focus the image.