Roland Bass Amplifier CB-60XL - Manual (Page 14)

12
Using the Tuner Function
CUBE-60XL BASS/CUBE-120XL BASS are equipped with a tuner
function. In addition to manual tuning, you can also use it as a
chromatic tuner.
* Use manual tuning when the strings are substantially out of tune
(such as after changing strings).
* When using the tuner function, no sound is played from the speaker,
the REC OUT/PHONES jack, or the LINE OUT jack.
* The sound input to the AUX IN jack is output.
Manual Tuning
1. Press the [TUNER] switch.
The unit enters the Tuner mode and the [TUNER] switch lights up.
2. Use the Type switch to select the string that you want to
tune.
Knob Position Description
5B
Open fi fth string of a fi ve-string bass with an additional
low string (B)
4E Open fourth string (E)
3A Open third string (A)
2D Open second string (D)
1G Open fi rst string (G)
1C
Open fi rst string of a six-string bass with an additional high
string (C)
A Open third string (semitone down) (A )
A Open third string (whole tone down) (G)
* The reference pitch is A=440 Hz. This cannot be changed.
3. Play a single note on the open string that you want to tune.
Tune the string until the green indicator lights.
Flat
Lights red Lights green Lights red
Sharp Pitch is correct
* The red indicator blinks if the pitch is substantially out of tune.
4. When you have fi nished tuning, press the [TUNER] switch
once again.
Chromatic Tuning
If you hold down the [TUNER] switch for one second or longer, the
[TUNER] switch blinks and the unit becomes usable as a “chromatic
tuner,” which automatically determines the name of the note closest to
the one played.
As with manual tuning, chromatic tuning allows you to play a single
note on the string that you want to tune. Tune the string until the
green indicator lights.