Fail-over modes – RTS TBX - TriBus ADAM User Manual
Page 10
6
Fail-Over Modes
Unlike the DBX card, audio and communications (called control
1
) between frames is separated between the TBX-Tribus card
and the MCII-e Master Controller Card. Communication between frames using TBX-Tribus occurs using the MCII-e Master
Controller over Ethernet. Audio is passed between frames using the TBX-Tribus card fiber connection (see Figure 29 to
Figure 31).
Audio between frames exists as long as there is a single valid link between frames. There are three (3) types of system
configurations:
•
Full Redundancy
•
Partial Redundancy
•
Non-Redundancy
1. Control is the ability to talk to keypanels and act on key presses.