Chapter 3 start to use ns-4102, Turn on the device, Configure system settings – RoyalTek RN5 User Manual

Page 17

Chapter 3 Start to Use NS-4102

After fully charging the NS-4102 it is ready to be used. You can now turn it on and proceed to

system settings configuration.

3.1.

Turn on the device

1. Sliding the battery switch to “ON”. (Default status OFF)

After turning on the device, main page will display.

This is also referred to the Favorite page.

3.2.

Configure system settings

If you intend to start using your NS-4102 at once, we recommend that you configure the language

and time zone settings first. The rest of the user preferences can be set up later.
1. Tap “System” in the

right category bar