Adding igd discovery and control, Adding igd discovery and, Chapter 7 – RCA SpeedTouch 716v5 (WL) User Manual
Page 135
Chapter 7
Troubleshooting
E-DOC-CTC-20050401-0008 v1.0
127
Adding IGD Discovery
and Control
Your MS Windows XP system is able to discover and control Internet Gateway
Devices (IGD), like the SpeedTouch™ on your local network. Therefore it is
recommended to add the IGD Discovery and Control client to your system.
Proceed as follows:
1
On the Windows task bar, click Start.
2
Select (Settings >) Control Panel > Add or Remove Programs.
3
In the Add or Remove Programs window, click Add/Remove Windows
Components
.
4
The Windows Components Wizard appears:
Select Networking Services in the Components list and click Details.
5
In the Networking Services window, Select Internet Gateway Device
Discovery and Control Client
and click OK.
6
Click Next to start the installation and follow the instructions in the Windows
Components Wizard
.
7
At the end of the procedure the wizard prompts you that the installation was
successful. Click Finish to quit.