Roland JUNO-Gi - Manual (Page 9)

9
Dividing the Keyboard to Play Diff erent Tones (Split)
What is a Split?
“Split” refers to settings in which the keyboard is divided into
left-hand and right-hand zones at a certain note, allowing you to
play diff erent tones in each zone . The point at which the keyboard is
divided is called the “split point .”
When you turn Split on, the Upper tone will be heard in the right
zone of the keyboard, and the Lower tone will be heard in the left
zone .
Lower 2 Lower 1 Upper 2 Upper 1
Tone Tone Tone Tone
1. Press the [SPLIT] button so it’s lit .
The LAYER/SPLIT screen will appear . The right-hand zone of the keyboard will play the Upper tone, and the left-hand zone will play the Lower tone .
Split Point Split Switch (✔ means on)
2. To cancel Split, press the [SPLIT] button and turn off its illumination .
• If you want to close the LAYER/SPLIT screen while leaving Split on, press the [EXIT] button .
• By holding down the [SHIFT] button and pressing the [SPLIT] button, you can access the LAYER/SPLIT screen without turning the Split function on/
off .
Reference
For details, refer to page 26 in the Owner’s Manual .
Changing the Split Point
Here’s how to change the point at which the keyboard is divided (the Split Point) when Split is on .
1. Hold down the [SPLIT] button, and press the key that you want to specify as the Split Point .
The key you pressed will become the split point .
The split point key is included in the Upper zone .
2. To close the setting window, press the [EXIT] button .
* If you’ve edited the settings, be sure to save the live set (p . 4) .