RCA RCA - Manual (Page 64)

62
Connections
VCR
TV
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT IN
R
L
3 4
CABLE/
ANTENNA
CABLE, CABLE BOX, OR ANTENNA
TV With RF Jack Only
This connection assumes:
• You are connecting antenna, cable, or cable box
system.
• Your television has only an RF input jack.
This connection provides:
• Mono sound playback from VCR.
• Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have:
• (1) coaxial cable for cable or antenna connection; (2)
for cable box
If your cable box is remote controllable:
• Position it above the VCR as shown. Make sure not
to block any of the VCR’s ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
• Tune your TV to channel 3 or 4, whichever one you
selected with the CH. 3/4 switch on the back of the
VCR.
• Set the Auto TV/VCR feature to “ON.”
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
2. Press the TV•VCR button and select a different
channel on the TV.
CABLE BOX
VCR'S
SIGNAL
Position Remote-Controllable
Cable Box
VCR
TRANSMITTER