RCA RCA - Manual (Page 16)

14
Setting Up the VCR
Selecting Channels
The CHANNEL + and - buttons access
those channels which are active in
your VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
Changing the Signal Type
This feature is useful if the cable signal goes out; you can
switch to Antenna for alternate television viewing.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between Cable and
Antenna. When you are finished, press 0 to exit back to
the main menu and 0 again to exit to normal viewing.
Adding or Removing Channels
You may want to add or remove channels after you Auto
Channel Search, especially if some of the channels have
weak signals or you don’t want to watch them.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 2 to display the ADD/REMOVE CHANNELS screen.
Use CHANNEL up or down or number buttons to go to
the channel you want to remove or add.
ADD/REMOVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add
Press MENU to exit
4. When at the channel, it will be added if not already on
the list or deleted if it was. If the channel was added,
you can press CLEAR to remove it. If the channel was
deleted, you can press INFO to add.
Time and Date
The VCR gives you two ways to set the time and date. The
Auto Clock feature which enables the VCR to update the
clock each time you turn off the VCR. The Auto Clock
feature is advantageous because it updates the time for
you automatically. The second way is entering the time and
date manually via the menu system.