RCA RCA - Manual (Page 17)

15
Setting Up the VCR
Auto Clock Info
With a cable box, the VCR will not
reset the clock after a power outage
unless the cable box is set to the
channel carrying the broadcast signal.
If Auto Clock Set is unsuccessful, try
tuning the VCR (or cable box) to a
channel carrying Allset time data
(usually PBS), then turn the VCR off. If
the time does not set within 10
minutes, set the time and date
manually through the Time menu.
Check local cable system or TV
stations for availability of channels
with Allset information.
Auto Clock Set Feature
The Auto Clock feature is set to ON at the factory. There
are certain steps that are required before the Auto Clock
feature works, such as Auto Channel Search, setting the
time zone, and setting the Daylight-Saving feature.
Setting the Time Zone
To set the Time Zone:
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
4 Set Daylight Savings
Time Data was found on
channel 20.
0 Exit
3. Press 3 to display the SET TIME ZONE screen.
SET TIME ZONE
What is your Time Zone?
1 Eastern
2 Central
3 Mountain
4 Pacific
5 Alaska
6 Hawaii
7>Automatic
Press MENU to continue
4. Select your time zone.
If you select Automatic for your time zone, the VCR sets
the clock using the first Coordinated Universal Time
information it finds in a broadcast signal (usually on a
PBS station). If the time is not correct, select another
time zone or set the time and date through the menu
system.