RuggedCom RUGGEDBACKBONE RX5000 - Manual (Page 33)

RuggedBackbone™ RX5000
Installation Guide
Chapter 4
Technical Specifications
Power Supply Specifications 27
Technical Specifications
Section 4.1
Power Supply Specifications
Table 8: Power Supply Specifications
Input Range
Power Supply Type
Min Max
Internal Fuse Rating
Max. Power
Consumption a
HI (125/250 VDC)
b
88 VDC 300 VDC 6.3A, 250V(T)
c
84 W
d
HI (110/230 VAC) b 85 VAC 264 VAC 6.3A, 250V(T) c 84 W d
a Power consumption varies based on configuration, i.e. the number and type of ports. Each 10/100Base-TX port consumes roughly 1W less than a fiber optic
port.
b The “HI” power supply is the same power supply for both AC and DC.
c (T) denotes time-delay fuse. Internal fuse is not user-replaceable.
d Rating at 85°C ambient temperature at worst-case load.
Section 4.2
Critical Alarm Relay Specifications
Table 9: Critical Alarm Relay Specifications
Parameter Value (Resistive Load)
Max Switching Voltage 250 VAC, 125 VDC
Rated Switching Current 2A@250VAC, 2A@30VDC
Section 4.3
Copper Ethernet Port Specifications
The RX5000 can be ordered with several different modules which contain 10/100Tx or 10/100/1000Tx Ethernet
ports. All copper Ethernet ports have the following specifications:
Table 10: Copper Ethernet Port Specifications
Parameter Specification Notes
Speed 10/100 or 10/100/1000 Mbps Auto-negotiating
Duplex FDX / HDX Auto-negotiating