beautypg.com

Gas fireplaces, Regency direct vent system (flex), Snorkel terminations – Regency Zero Clearance Direct Vent Gas Fireplace P121/P131-LP2 User Manual

Page 3

background image

Regency Direct Vent System (Flex)

Horizontal Terminations Only

These venting systems, in combination with the P121/P131 Direct Vent
Gas Fireplace, have been tested and listed as a direct vent heater system
by Warnock Hersey. The location of the termination cap must conform
to the requirements in the Vent Terminal Locations diagram.

FPI Direct Vent (Flex) System Termination Kits include all the parts
needed to install the P42 using a fl exible vent.

FPI Kit #

Length

Contains:

#946-513

2 Feet

1)

6-5/8” fl exible liner (Kit length)

2)

4” fl exible liner (Kit length)

3) spring

spacers

(3)

4) thimble

(2)

5)

AstroCap termination cap (1)

6) screws

(12)

7)

tube of Mill Pac (1)

8) plated

screws

(8)

9)

S.S. screws #8 x 1-1/2” drill point, (4)

#946-515

4 Feet

#946-516

10 Feet

Notes:
1)

Liner sections should be continuous without any joints or seams.

2)

Only Flex pipe purchased from Regency may be used for Flex
installations.

3)

Horizontal sections must be supported every 3 feet.

P121-P131 Gas Fireplace

Snorkel Terminations

Snorkel Terminations:
For installations requiring a vertical rise on the exterior of the building,
14-inch and 36-inch tall Snorkel Terminations and the Riser Vent are
available. Follow the same installation procedures as used for standard
Horizontal Termination. NEVER install the snorkel upside down.

Below Grade Snorkel Installation (Dura-Vent Only)
If the Snorkel Termination must be installed below grade, i.e. basement
application, proper drainage must be provided to prevent water from
entering the Snorkel Termination. Refer to Rigid Pipe Installation
instructions for details. Do not attempt to enclose the Snorkel within the
wall, or any other type of enclosure.

Dura-Vent

Snorkel

Min. 12"*
(305mm)

Alternate Horizontal

Termination Caps

Alternate:
Horizontal
Riser Vent
Terminal
Part# 640-530/P

Riser Vent

Termination

Min. 6-1/4"*

(159mm)

Min.

12"*

(305mm)

Adequate

drainage

Window

Well

Gravel

Dura-Vent

Snorkel

71

June 2007 Regency Product Specifi cations Book

Gas Fireplaces

Gas Fir

eplaces

This manual is related to the following products: