Chapter 6: additional information, Troubleshooting, General problems – RCA DRC8040N User Manual

Page 52: Dvd problems

Graphics contained within this publication are for representation only.

Chapter 6: Additional Information

Troubleshooting

General Problems

Player won’t work (locks up)

• Try unplugging the AC power cord and plugging it back in.
• Reset the DVD recorder: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP button—wait at least 3

seconds before you release both of the buttons. You’ll need to set up your menu preferences because this Reset Procedure returns the DVD recorder’s
menus to the factory default settings and also erases the contents of the Disc Library.

No power

• Plug in the DVD recorder. Make sure both ends of the AC power cord are securely plugged into the recorder and into an AC outlet.
• Make sure you’ve plugged it into a working outlet and/or a power strip that is turned on.
• Don’t plug the unit into an outlet that is operated by a wall switch.

No picture

• Turn on the TV.
• Tune your TV to the Video Input Channel that corresponds to the jacks you used to connect the TV to the DVD recorder (go to page 18 for more help).
• Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position. Try playing the disc again.
• Make sure your DVD recorder is connected properly.
• If you connected a satellite receiver or a cable box, make sure it is turned on.
• Press the ANTENNA button on the remote control.

A screen saver appears on the TV

• Your player is equipped with a screen saver that appears on the TV after your player has been idle for several minutes. To make it disappear, press STOP or

CLEAR on the remote.

The menu is displayed in a foreign language

• The

Language menu (Display menu) is set to that language. Go to the Setup menu and choose Languages (in Spanish, shown as Idiomas; in French, as Langues),

choose the Display option. Highlight the language you prefer, and press OK.

I forgot my password

• Press the STOP button on the front of the unit while you press the STOP button on the remote control—keep pressing both buttons for approximately 3

seconds (until the icon disappears from the front panel display). Release both buttons (the player should be unlocked). If that doesn’t work, try resetting the
DVD recorder (instructions are listed below).

• Reset the DVD recorder: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP button—wait at least 3

The time (clock) is wrong

Go to the System Options menu and select AutoClock. Set it to off and then set the time manually via the Clock Setup menu, which is found in the Installation menu.

DVD Problems

Disc won’t eject

• When you put a disc into the player, the player may take up to 15 seconds to read the disc. You won’t be able to eject the disc during this time. Wait 15 seconds

and try again.

• Maybe the Tray Lock feature has been activated. To unlock the disc tray, press and hold the STOP button on the front of the unit and then press and hold the

OPEN/CLOSE button on the front of the unit at the same time—wait 3 seconds before releasing both buttons.

Disc tray won’t open

• Maybe the Tray Lock feature has been activated. To unlock the disc tray, press and hold the STOP button on the front of the unit and then press and hold the

OPEN/CLOSE button on the front of the unit at the same time—wait 3 seconds before releasing both buttons.

Disc won’t play

• Many problems encountered when playing (or recording) a disc are related to the wide variation in disc quality due to the large number of brands and

manufacturers. We highly recommend using discs from a reputable manufacturer. If you encounter problems with one brand, please try another brand.

• Insert a disc with the label side facing up.
• Check the type of disc you put into the player. This player only plays DVD video discs, Video CDs, audio CDs, and CDs with true mp3 fi les and/or JPEG fi les.

mp3 fi les that have been converted to MPX fi les (or similar types of fi les) won’t be recognized by your DVD recorder.

• Both the DVD recorder and the disc are coded by region. If the regional codes don’t match, the disc cannot be played. This player is Region No. 1. Region

coding isn’t applicable to discs you use to record (DVD+R and DVD+RW).

• Press STOP (the main menu appears). Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position. Try playing the disc again.
• If you’re playing a Multisession CD, you might not have closed the session before ejecting it from your computer. Close the session and try the disc again.
• If you’re trying to play a DVD+R or DVD+RW disc you recorded in this DVD recorder in another DVD player, the DVD player may not support DVD+R or

DVD+RW discs. Also, if it is a DVD+R disc make sure you fi nalize it (page 43).

• If you’re trying to play a DVD-R or DVD-RW disc, it must have been recorded using the video mode (VM) and DVD-R discs must have been fi nalized.
• If it’s a DVD+R or DVD+RW disc, check the setting in the Parental Controls menu. Go to Unrated Titles, and see if the box is checked next to Apply to DVD+R and

DVD+RW discs. If there is a check in the box and you set Unrated Titles to Password Required, simply highlight the checkbox and press OK. Try to play the
disc again.