RCA DRC8040N - Manual (Page 50)

Graphics contained within this publication are for representation only. 48
Chapter 5: Menu System
Installation:
The submenus contained in the Installation menu pertain to the type of signal that is connected
to your DVD recorder (cable or off-air antenna). If you move, or change any of the information
you entered when you fi rst set up your DVD recorder, you need to change the information in the
following menus.
Interactive Setup: The fi rst time you turned on your DVD recorder, you had to complete
an interactive setup so your DVD recorder could have the information it needs to function
properly. For details about the Interactive Setup, go to page 15. To go through this procedure
again to change settings, highlight Interactive Setup and press the OK button.
Channel Search: If you’ve changed program providers (cable and/or satellite), the Channel
Search will automatically search the signal and put the latest channels in the DVD recorder’s
channel list. Use the arrow buttons to highlight Channel Search, and press OK to begin (a
progress indicator appears to let you know how quickly the search is being completed).
Clock Setup: If the clock is incorrectly set or you skipped this step during the interactive
setup, you can set the DVD recorder’s clock using the number buttons on the remote and the
arrow buttons to navigate. Follow the on-screen instructions.
Note: In order for Timer Recordings to work, you must set the clock to the correct time
and date.
Channel List: Enables you to change what channels are accessed when you press the DVD
recorder’s channel up and down buttons (if you delete a channel from the channel list, you
can still access it by using the number buttons on the remote). For more explanation, go to
page 16.
Parental Control
System Options
Recording Options
Disc Options
Languages
Installation
Interactive Setup
Channel Search
Clock Setup
Channel List
Searching channels...
35% complete
2 channels found
Please wait....
Edit the list of channels found