Ricoh Caplio R 3 - Manual (Page 126)

124
Changing the Playback Method for Viewing
on TV (VIDEO OUT MODE)
You can view your still images and movies on a television screen by
connecting your camera to a television with the AV cable that came
with your camera.
Your camera is set to NTSC video format (used in Japan and other
countries) for use with television equipment, etc. If the equipment
you want to connect to uses PAL format (used in Europe and
elsewhere), then switch your camera to PAL format before
connecting.
To change the playback format, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.111.
2.
Press the " button to select
[VIDEO OUT MODE] and press the
$ button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the M/O or # button.
5.
If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Note
Connecting the AV cable to the camera turns off the LCD monitor display.
Reference
For how to view still images on your television screen, see P.48.
Possible Settings
NTSC *Setting upon purchase
PAL