Ricoh Caplio R 3 - Manual (Page 121)

119
Ch
angi
n
g
Cam
e
ra
Set
tings
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to one second, but this can be
changed.
To change Confirmation Time, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.111.
2.
Press the " button to select [LCD
CONFIRM.] and press the $
button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the M/O or # button.
5.
If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Caution
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may appear
and persist on the monitor.
Possible Settings
OFF (Photo not displayed for confirmation)
0.5 Second *Setting upon purchase
1 Second
2 Seconds
3 Seconds