Ricoh Caplio R 3 User Manual
Page 117
115
Ch
angi
n
g
Cam
e
ra
Set
tings
Assigning a Function to the ADJ. Button
(ADJ. BTN. SET. 1/2)
Pressing the ADJ. button allows you to display the screens for setting the
exposure and white balance with a small number of button operations.
Using the [ADJ. BTN. SET. 1] or [ADJ. BTN. SET. 2] option allows you to add a
function that can be activated by pressing the ADJ. button.
To assign a function to either [ADJ. BTN. SET. 1] or [ADJ. BTN. SET. 2], follow
the steps below.
1.
Display the setup menu.
For detailed operation, see P.111.
2.
Press the " button to select [ADJ.
BTN. SET. 1] or [ADJ. BTN. SET. 2],
and press the $ button then.
3.
Press the !" buttons to select
the desired setting.
4.
Press the M/O or # button.
5.
If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Reference
For how to use the ADJ. button, see P.59.
Possible Settings
Refer to
OFF *Setting 2 upon purchase
-
ISO SETTING *Setting 1 upon purchase
P.83
QUALITY (PIC/QUALITY)
P.62
AF/MF (FOCUS)
P.66
SHARP (SHARPNESS)
P.70
PHOTOMETRY
P.69
AUTO BRACKET
P.72
CONT
P.91
IMAGE WITH SOUND
P.78