Runco DTV-992 - Manual (Page 56)

APX-5
Appendix 2
FOCUSING THE CAMERA LENS
The lens of the camera must be focused properly on the pro-
jection screen. Follow the steps described below:
In the EYE-Q TM SETUP menu, highlight FOCUS THE
LENS by pushing the up or down keys of the control
disc.
Press the button to start up the process.
A pattern of horizontal alternating green/black bars will be
projected onto the screen, together with a textbox. Inside the
box, the text “CAMERA FOCUS” indicates the item subject to
adjustment and under the text, a numeric bar scale (from 0
to 99) will visualize the correction.
To obtain a correctly focused camera, turn the lens until max-
imum readout. The value of the stabilized maximum read-
out will be in the range between 60 and 90, depending on
ambient light.
In rear projection, the maximum value can be less than 60
dependent on ambient light.
After finishing the correction, press the button to
return to the EYE-Q
TM menu
EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with
then .
to return or
EYE-Q SETUP
FOCUS THE LENS
CENTER THE CAMERA
CONFIGURATION: rear/front
LEARN REFERENCE
TOUCH-UP OPTIONS:
Select with
then .
to return or
50
CAMERA
FOCUS
T
V
LE
NS 1:6
4
T
V
LE
NS 1: 64