Radio Shack AM/FM Stereo Cassette - Manual (Page 6)

6
Using an Adapter Harness
If you are replacing an existing stereo, or if your vehicle has been factory-wired
for autosound components, you can use an adapter harness to connect the power
and speakers. RadioShack stores sell adapter harnesses for most vehicles.
Follow the directions that come with the adapter harness to temporarily connect the
power and speakers.
After you connect the adapter harness to your vehicle, you can skip to “Testing the
Connections” on Page 11.
MAKING THE CONNECTIONS
Ground (–)
(To Chassis Ground)
+ 12V To Ignition
Amp Remote Turn On 500mA Max
(To Optional Equipment)
+ 12V To Battery
Front Left Speaker
Front Right Speaker
Rear Left Speaker
Rear Right Speaker
Black
Red
Blue/White
Yellow
Power
Wires
White
White/Black
Gray
Gray/Black
Green
Green/Black
Violet
Violet/Black
12-2115a.fm Page 6 Wednesday, January 12, 2000 11:18 AM