beautypg.com

Roberts Gorden Caribe CGTH-50 User Manual

Page 24

background image

CGTH I

NSTALLATION

, O

PERATION

AND

S

ERVICE

M

ANUAL

18

4.10 Typical Installation

Figure 9 is a typical installation of the CGTH-Series heater. The installation drawing shown has a straight
horizontal venting arrangement and specifies the minimum space required for maintenance, as well as the
allowable range of distances between the two suspension points.
Detailed venting arrangements are illustrated in the venting section of this manual.

FIGURE 9: Typical Installation

1" (25 mm)

Maximum

6" (152 mm) Minimum

Vent Terminal

Exterior Wall

Burner Box

Reflector

Suspension

Points

Minimum

Recommended

for Servicing

Minimum Mounting

Height - 7' (2133 mm)*

24"

(610 mm)

15"

(381 mm)

X

X Dimension

Model

Minimum

Maximum

CGTH-30

60" (1524 mm)

72" (1829 mm)

CGTH-40

102" (2590 mm)

114" (2895 mm)

CGTH-50

102" (2590 mm)

114" (2895 mm)

(*) For minimum mounting height in aircraft
hangars and public garages,

See Page 11

,

Sections 3.5.1

and 3.5.2.

4.11 Heater Orientation

The CGTH-Series heater may be installed in any of
the three orientations indicated below. Select the
heater orientation that is best suited for the location
that you have chosen for your heater.

• Horizontal

• Tilted 45° Right

• Tilted 45° Left

NOTE: If the heater is going to be vented through the

roof, be sure to carefully review the roof option
installation instructions on Pages 29 and 30.
Ensure that the selected mounting site will satisfy
the measurement parameters (vent length not to
exceed 10' [3048 mm]) described in that section.

4.12 Horizontal Installation

For Horizontal Installation:

1. Using snap hooks, attach two equal lengths of

welded steel chain 75 lbs. (33 kg), to the two
uppermost holes in the front fixed hanger.

2. Slip the free end of both chains onto another snap

hook (See Page 19, Figure 10).

3. The uppermost snap hook can now be installed on

the suspension hardware that you have installed
for suspension of the unit. An additional length of
chain may also now be installed, if required, to
lower the heater.

This manual is related to the following products: