ROTEL RDV-1040 - Manual (Page 19)

19 English
Audio Selection
During playback, selects the audio language
or sound track.
1. Open the pull-down window.
2. Press / to select a desired audio lan-
guage or sound track.
3. Press ENTER
34 to begin playback with
the selected audio.
Subtitle Selection
During playback, selects the subtitle language.
1. Open the pull-down window.
2. Press / to select a desired subtitle lan-
guage.
3. Press ENTER
34 to begin playback with
the selected subtitle.
Angle Selection
During playback, selects a scene angle in a
multi-angle part.
1. Open the pull-down window.
2. Press / to select a scene angle.
3. Press ENTER 34 to begin playback with
the selected scene angle.
Menu bar functions for SVCD/
Video CD/Audio CD
Time Mode Selection
Selects the time mode shown in the display win-
dow and in the status bar.
Press ENTER 34 to select the time mode from
the following.
TIME: Current track elapsed time
REM: Current track remaining time (while in
stop mode, current track total time)
TOTAL:
Disc elapsed time
T.REM: Disc remaining time (while in stop
mode, disc total time)
Repeat Mode
Selects the repeat mode.
1. Open the pull-down window.
2. Press / to select the repeat mode from
the following.
TRACK: Current track repeat
ALL: All track repeat
A-B: A-B repeat
OFF: Repeat mode deactivated
3. Press ENTER 34 to make the selected re-
peat function active.
Time Search
Specifies a time from the beginning of the disc
as the point from which to begin playback.
Program Playback PROG.
While stopped, specifies the playback order
of tracks.
Random Playback
While stopped, activates random playback.
Audio Selection
During SVCD/Video CD playback, selects the
audio channel(s).
1. Open the pull-down window.
2. Press
/ to select a desired audio
channel(s).
3. Press ENTER
34 to play back with the se-
lected audio channel(s).
Subtitle Selection
During SVCD playback, selects the subtitle.
1. Open the pull-down window.
2. Press / to select a desired subtitle.
3. Press ENTER
34 to begin playback with the
selected subtitle.
Basic MP3 Operations
Make sure that the TV/DVD switch 1 on the
remote control is set to “DVD” when using the
, numeric and TV/VIDEO - CANCEL
buttons for controlling the RDV-1040.
The RDV-1040 can play back MP3 files and
WMA files on a home recorded CD-R/RW disc
or commercially available CD. We refer to a
disc that contains MP3 and/or WMA files as
an “MP3/WMA disc” in this manual.
If a disc contains both of MP3/WMA files and
JPEG files, you can only play back files of the
type selected by the MP3&WMA/JPEG setting
in the PICTURE preference display.
About MP3/WMA Discs
On an MP3/WMA disc, each song is recorded
as a file (track). Files are sometimes grouped
into folders by artists, album, etc.
• Each file is regarded as a track.
• A folder which has one or more files is re-
garded as a group.
• A folder which does not directly contain any
tracks is ignored.
• Files which do not belong to any folder are
grouped into “group 1.”
• The RDV-1040 recognizes up to 150 tracks
per group, and up to 99 groups per disc. If
there are files other than MP3/WMA files,
they also count in the 150-file total.
Notes For Making Your Own
MP3/WMA Disc Using a
CD-R/CD-RW Disc
• Select “ISO 9660” as the disc format.
• For MP3 files, we recommend you record
your material at a 44.1 kHz sampling rate,
using the 128 kbps data transfer rate.
• For WMA files, make sure that the copyright
feature is set to off.
• For WMA files, we recommend you record
your material at a bit rate of 64 kbps or
higher.
Basic operations
Use the following buttons to control MP3/WMA
disc playback.
ENTER: Starts playback while stopped.
: Starts playback while stopped or
paused.
■: Stops playback.
II : Pauses playback.
or Skips back or forward a track
: during playback. Selects the previ-
ous or next track while stopped.
If you press (PLAY) 28 during playback,
or press ■ (STOP) 9 to stop playback fol-
lowed by , the RDV-1040 starts playback
from the beginning of the current track.
— continued