NAD L 76 - Manual (Page 14)

ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
SVENSKA
14
RDS (RADIO DATA SYSTEM)
RDS is a broadcasting service which allows stations to send additional information along with the regular
radio program signal. RDS services can be received only in FM band.
RDS DISPLAY
1 Select the tuner with the Source selector.
2 Press the AM/FM button to select FM.
3 Press the DISPLAY button. Each time you press the button briefly (1.5 sec or less), the modes will
change as follows regardless of the current mode.
ABOUT USER NAMES
You can assign an eight character “User Name” to each radio preset, which will show in the front-panel
readout whenever that preset is recalled.
ENTERING USER NAMES
For example, to name a radio preset “NEWS”: recall the desired radio preset, and then press the front-
panel DISPLAY key for about four seconds; the readout shows a blinking bar. Use the DISPLAY key to
select the first character of the name (“N” from the alphabetic list; press either TUNE
key to select
the character. Press the DISPLAY key to move to the next position. Repeat this process for each character
in sequence; press the MEMORY key once to store the User Name and exit the text-entry mode.
1 Press and hold the TIMER ON/OFF button for more than 4 seconds. “TIME” scrolls on the display and
then replaced by the current time with the hour blinking at an intervals of 1 second.
2 Adjust the hour by pressing TIME DOWN/UP button. Otherwise press TIMER ON/OFF button briefly to
bypass current time setting and move to On Time Adjust mode. Another press of TIMER ON/OFF
button will bypass On Time setting and move to Off Time setting.
3 Press the MEMORY button briefly. The minutes will blink at an interval of 1 second.
4 Adjust the minute by pressing TIME DOWN/UP button.
5 Press MEMORY button briefly to change to On Time Adjust Mode. “ON TIME” scrolls on the display
and is then replaced by the previously set On Time with the hour blinking at an interval of 1 second.
6 Adjust the hour by pressing TIME DOWN/UP button.
7 Press the MEMORY button briefly. The minute will blink at an interval of 1 second.
8 Adjust the minute by pressing TIME DOWN/UP button.
9 Press MEMORY button briefly to change to Off Time Adjust Mode. “OFF TIME” scrolls on the display
and is then replaced by the previously set Off Time with the hour blinking at an interval of 1 second.
10 Adjust the hour by pressing TIME DOWN/UP button.
11 Press the MEMORY button briefly. The minute will blink at an interval of 1 second.
12 Adjust the minute by pressing TIME DOWN/UP button.
13 Press MEMORY button briefly to change to Normal Mode.
1
3 2
2, 4, 6, 8
10, 12
3, 5, 7
9, 11, 13 1,2
CLOCK / ON TIME / OFF TIME ADJUST
PS RT RDS OFF