Figure 3-1, Figure 3-2, Procedure 3-1 – Nikon MOTORMESH 4300 User Manual
Page 32: Configuring a 4300 device mesh -2
Chapter 3: Device Configuration
July 2007
3-2
Procedure 3-1 Configuring a 4300 Device Mesh
1
Ensure that all the 4300 devices are wire-connected to the MOTOMESH 2.0 MiSC. NOTE: It is
recommended that the 4300 devices are set-up on the bench prior to actual deployment in the field.
2
The MOTOMESH 2.0 MeshManager element management application must be installed and running.
3
From within MeshManager select the
Add MotoMesh Duo Device icon from the Toolbar menu, or
select File | Add MotoMesh Duo Device from the application menu.
4
The Add New MOTOMESH Duo Device panel will now be shown in MeshManager.
Figure 3-1
The Add New MOTOMESH Duo Device Panel in MeshManager
5
Enter the 4300 Device’s 802.11 Ethernet MAC address, from the external device’s label, into the 802.11
AP Ethernet entry field.
Figure 3-2
Entering the 802.11 AP Ethernet MAC Address in MeshManager