Netac Tech T600 - Manual (Page 44)

Netac AirTrack T600 Mini Wireless Router
39
9 Other Page
9.1 WAN Page
Only AP Router Mode has WAN page, shown in Figure 9.1. The WAN page allows user to set Protocol, IP
address, and so on.
Table 9.1 details the options.
Figure 9.1 AP Router Mode - WAN Page
Table 9.1 AP Router Mode - WAN Page Options
Field Description
Protocol
Setting the method to obtain IP address for WAN connection. Select DHCP, Static
or PPPoE.
IP Address
Set the IP address of T600.
NOTE: To configure T600, the user must access T600 from a PC that is on the
same subnet.
Subnet Mask Allow the user to specify a subnet mask.
Gateway Allow the user to specify a gateway.