Netac Tech T600 - Manual (Page 16)

Netac AirTrack T600 Mini Wireless Router
11
5 Mode Selection Page
The first step in using T600 is selecting the operating mode. The default operating mode is AP Router Mode.
To view the web page for the device, open a web browser and enter "192.168.1.1" (default IP address of the
device) on the address bar. The default username is "admin" and the default password is "password".
Figure 5.1 shows the page displayed after logged on.
Figure 5.1 Mode Selection Page
To select a mode, click the Mode tab. Click the radio button next to the desired mode and click the Apply
button. The device will reboot in the selected mode. After rebooted, click the Setup button to begin
configuring the device.
The What's This? button opens a popup window with a brief description for each mode.
5.1 AP Router Mode Setup Page
To configure T600 in AP Router Mode, select AP Router in the Mode Selection Page (Figure 5.1), click Apply