Nortel Networks Nortel Business Services Gateway BSGX4e User Manual
Page 22
23
NN47928-311
Configuration process
3 Wizard pages
Step 4
WAN Interface Setup page
WAN (Wide Area Network) is your Internet
connection. Your choices to define this
connection are:
DHCP Client
– Your service provider assigns a
dynamic (temporary) IP address. This is the
most common interface type.
Static IP
– You have purchased a static
(permanent) IP address.
PPPoE
– This is a protocol that establishes a
direct connection to your service provider
(rather than routing an IP address). This is
common with DSL.
Note: Make note of the connection type you select
here because you use it again in
Click the radio button that corresponds to your service account’s interface type:
z
DHCP Client
No configuration is required.
z
Static IP
If you purchased a static IP address, you received from your service provider the standard
Internet connection data (see
)
for the fields under this heading.
z
PPPoE
If your service provider uses PPPoE, you received from your service provider your account
login information, which you enter here.
If the PPP account includes a static IP address, enter it into the
Self IP
field, and enter the
subnet mask into the
Mask
field.