Nokia 2112 - Manual (Page 57)

V o i c e ( M e n u 5 )
48 Copyright © 2004 Nokia. All rights reserved.
The phone replays and then saves
the recorded tag. The
icon
appears next to commands which
have voice tags assigned.
Activate a voice command
After you have associated a voice
tag with a phone function, you can
issue a command by speaking the
voice tag.
1. Press and hold Contacts .
2. When Please speak now appears,
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice tag,
Found appears, and the phone plays
the recognised voice tag through the
earpiece. The function you requested
is activated.
Options
After you have associated a voice
tag to a command, you can choose
one of the following options:
• Select Playback to listen to the
voice command tag.
• Select Change to change the
voice command.
• Select Delete to erase the voice
command tag.
■ Voice recorder
This feature allows you to record
speech or sound with your phone and
listen to them later. The total available
time is 60 seconds if no memos have
been stored. The maximum length of
a recording depends on how much
memory remains available.
Record speech or sound
1. At the standby screen, select
Menu > Voice > Voice recorder >
Record > Select .
2. After the recorder start tone is
heard, begin recording speech or
sound.
3. When you are finished recording,
press Stop .
4. Type in a name for the recording
and press OK . The recording is
saved to the Recording List.
Options
After you have saved the recording
to the
Recordings list , highlight the
recording and choose one of the
following options:
• Select Playback to listen to the
recording using the earpiece.
• Select Delete to erase the
recording.
• Select Edit title to rename the
recording.
• Select Add alarm to add an alarm
to the recording.