National Instruments NI-VXI - Manual (Page 54)

Chapter 3 Software Overview
NI-VXI User Manual 3-16 © National Instruments Corporation
(DIR, DOR, WR, RR, and ERR*) are done automatically within the
functions as required.
Figure 3-2 provides a graphical overview of the Servant Word Serial
functions.
ERROR
Hardware
WSScmdHandler
NI-VXI base Interrupt Service Routine (ISR)
WSSenable()
WSSdisable()
SetWSScmdHandler()
GetWSScmdHandler()
DefaultWSScmdHandler()
Read Command
WSSLcmdHandler WSSrdHandler WSSEcmdHandler WSSwrtHandler
SetWSSwrtHandler()
GetWSSwrtHandler()
DefaultWSSwrtHandler()
SetWSSrdHandler()
GetWSSrdHandler()
DefaultWSSrdHandler()
SetWSSLcmdHandler()
GetWSSLcmdHandler()
DefaultWSSLcmdHandler()
SetWSSLcmdHandler()
GetWSSLcmdHandler()
DefaultWSSLcmdHandler()
WSS? WSSL? WSSE?
if write pending and cmd is
BREQ respond with next byte
if done
call WSSwrtHandler with
status set WR and exit
else if read pending and cmd
is BAV store byte in buffer
if done
call WSSrdHandler with
status set WR and exit
else call WSScmdHandler
Local VXI Communication Registers
Write Data
Low High Ext
Read Data
Low High
Response
WR RR ERR*
WSSsendResp()
WSSLsendResp()
WSSwrt()
WSSrd()
NI-VXI
Software
User
Application
User
ISRs
Word Serial
Processor
RespProtError()
GenProtError()
(uint16)cmd
(uint16)cmd
(uint32)cmd (uint16)cmdExt, (uint32)cmd
(int16)status, (uint32)count (int16)status, (uint32)count
WSSnoResp()
WSSLnoResp()
Figure 3-2. NI-VXI Servant Word Serial Model
The following paragraphs describe the Servant Word Serial, Longword
Serial, and Extended Longword Serial Protocol functions. The
descriptions are grouped by functionality and are presented at a
functional level describing the operation of each of the functions.