beautypg.com

Hold your device correctly, Tips on creating a gps connection, Positioning (gps) – Nokia 002F4W8 User Manual

Page 53

background image

when your device is receiving signals from

satellites.
When you activate A-GPS, your device receives

useful satellite information from an assistance data

server over the cellular network. With the help of

assisted data, your device can obtain the GPS

position faster.
Your device is preconfigured to use the Nokia A-GPS

service, if no service provider-specific A-GPS settings

are available. The assistance data is retrieved from

the Nokia A-GPS service server only when needed.
You must have an internet access point defined in

the device to retrieve assistance data from the

Nokia A-GPS service over a packet data connection.

To define an access point for A-GPS, press

, and

select

Tools

>

Settings

>

General

>

Positioning

>

Positioning server

>

Access

point

. A wireless LAN access point cannot be used

for this service. Only a packet data internet access

point can be used. Your device asks for the internet

access point when GPS is used for the first time.

Hold your device correctly

The GPS receiver is located on the back of the device.

When using the receiver, make sure that you do not

cover the antenna with your hand.

Establishing a GPS connection may take from a

couple of seconds to several minutes. Establishing

a GPS connection in a vehicle may take longer.
The GPS receiver draws its power from the device

battery. Using the GPS receiver may drain the

battery faster.

Tips on creating a GPS

connection

If your device cannot find the satellite signal,

consider the following:

If you are indoors, go outdoors to receive a better

signal.

If you are outdoors, move to a more open space.

53

Positioning (GPS)