Connecting to a remote access server – NEC MOBILEPRO 900 User Manual
Page 97
Setting Up a Remote Connection 5-5
Connecting to a Remote Access Server
Once you establish an account with your RAS and gather the necessary
configuration information, you are ready to create a connection on
your MobilePro for your RAS account.
Follow these steps to create a new connection for your RAS account.
1.
Tap Start, Programs, Communication, then select Remote
Networking.
2.
Double tap the Make a New Connection icon.
3.
Enter a name for the new connection.
4.
Select Dial-Up Connection as the connection type and tap Next.
5.
Use the dropdown box to select Internal Modem on COM 4 and
tap Configure.
6.
Select the required port settings and call options. Tap OK.
7.
Tap TCP/IP Settings and configure the required General Settings
and Name Servers. Tap OK.
8.
Tap Next and enter the required dial-up telephone number. Tap
Finish.
Once your RAS connection is established you can configure your
MobilePro to send and receive e-mail through your RAS. Follow the
instructions in “Sending and Receiving E-mail” and “Activating a
Connection,” later in this chapter, to send and receive e-mail through
your RAS.