NEC MOBILEPRO 900 - Manual (Page 21)

Getting Started 1-13
Continue to the following sections to complete the setup of your
system:
! “Introducing the Software” to get acquainted with system software.
! “Connecting to Your PC via USB Cable” to configure the
MobilePro for synchronization with your host PC using the USB
port. The MobilePro ships with the USB PC Connect cable. The
default PC Connection is through the USB port.
! “Connecting to Your PC via Serial Cable” to configure the
MobilePro for synchronization with your host PC using the serial
port.
! “Connecting to Your PC via Infrared Port” to configure the
MobilePro for synchronization with your host PC using the infrared
port.
! “Synchronizing with Your Host PC” to activate the ActiveSync
components on the MobilePro and host PC.
Introducing the Software
Your MobilePro 900 features the latest version of Microsoft
®
Windows
®
Handheld PC 2000 software along with additional
applications and drivers on the accompanying CDs.
Your MobilePro 900 software includes:
! Microsoft Windows CE operating system
The Windows CE operating system applications are preloaded (in
ROM).
! Microsoft ActiveSync 3.1 CD
This CD includes the ActiveSync software you need to install on
your host PC for access and synchronization.
Note The Microsoft ActiveSync software contains ActiveSync 3.1.
Systems with the Microsoft Windows XP operating system require
ActiveSync 3.5.
You can download ActiveSync 3.5 from the NEC Solutions America
support site (
www.necsolutions-am.com/support, select Handhelds and
Upgrade to Microsoft ActiveSync 3.5 ) or from the Microsoft Web site
( www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp ).