NetComm NB1300 Plus 4W - Manual (Page 8)

www.netcomm.com.au Rev. 1- YML672
Page 8 NB1300_2 ADSL Modem
Overview Section
LED Indicators
The LED Indicators are located on the front of the unit, they are green in colour. The meanings
are as follows:
Label Meaning Status Indicates:
PWR Power On Power is on
O f f Power is off
RDY Ready Flashing Unit is powered up correctly when pulsing steadily.
ON or OFF during reboot or when unit switched
OFF. If ON or OFF permanently then there is an
error. Try powering unit OFF then ON after a
minute.
WAN LNK WAN Link Flashing Link being attempted by router.
On Link established
O f f No link
WAN RXD WAN Receive Data Flashing Flashes when receiving or sending data on the WAN
port (ADSL line)
O f f No data being sent or received
LAN ACT LAN Activity Flashing Flashes when data is being sent or received on the
LAN connection
LAN LNK LAN Link On Indicates a link to your LAN or Network card is
active.
O f f Indicates no link to LAN