NETGEAR PS100 User Manual

Page 28

NetGear Print Server Manual

number.

• If using "802.11 Ad-hoc" or "Ad-hoc" mode, select the value you wish to use on

your Wireless LAN.

• If using "Infrastructure" mode, the Channel is selected automatically, to match the

Channel used by the Access Point.

• If you experience interference (shown by lost connections and/or slow data

transfers) you may need to experiment with different channels to see which is the

best.

Network Type

Select the correct value for your Wireless LAN.

• 802.11 Ad-hoc mode is used when there is no Wireless Access Point, and each

Wireless station communicates directly with other Wireless stations. This is the

current standard.

• Ad-hoc mode is used when there is no Wireless Access Point, and each Wireless

station communicates directly with other Wireless stations. This is the older

standard.

• Infrastructure mode is used when each Wireless station connects to the Wireless

Access point. This also provides access to the wired LAN.