NETGEAR PS100 - Manual (Page 123)

NetGear Print Server Manual
114
Read Only
Indicates whether or not the Environment Variable is modifiable.
Test page Button Informs the print server to send a test page to the printer. The printout includes print server status
information, which is useful when troubleshooting any printing problems.
Refresh Button If you suspect that the printer status is not properly updated on the screen, click this button to generate
packets to collect updated printer information.
Cancel Button Close this pop-up window.
Help Menu
The Help menu has a single item - About - which will display information about the program, as
shown below.
Help - About
Configuring Using IP Setup
IP Setup is a tool to let you configure the IP address for NETGEAR Print Server in Microsoft
Windows environment. Please see Appendix E for IPSetup utility reference.
With IPSetup tool, you can force an IP address to a NETGEAR Print Server. It sets up the subnet mask
and default gateway as well as disables the DHCP. In this way, you can always get a known and fixed
IP address.