Eizo T57S - Manual (Page 20)

20
4 POWER-SAVE SETUP
NUTEK System
1) First make the appropriate ScreenSaver settings (Macintosh/Energy
Saver) for the PC.
2) Then select 'NUTEK'.
3) Set the delay time, which is the interval between the time that the
ScreenSaver (Macintosh/EnergySaver) blanks the screen and the time
that the monitor enters Mode 1.
4) Set the Mode 1 duration time which is the user definable time (0-60
minutes) before the monitor enters Mode 2.
NUTEK power-saving method
Mode 1 operates for a user-definable period in ‘Duration’ (in 0-60
minutes) before the monitor enters Mode 2. If the keyboard or the mouse
are not in use during this period, the monitor will then enter
PowerManager Mode 2.