Napoleon Fireplaces Vittoria GD19P - Manual (Page 24)

24
W415-0612 / C / 01.25.08
FRONT FACING AND INSET KIT INSTALLATION
4. Clip the keystone 6
over the band of material
and centre on the magnet.
5. While angling the bottom inset, insert the side tabs on the
bottom inset
4 behind the side edges of the control panel
opening.
6. Close the bottom inset assembly 4 against the magnet
to hold closed.
1. Secure the insets 1 2 and screens 3 to the front facing
5 with the locktooth washers and hex nuts supplied.
WARNING:
The components in this kit are heavy, use care when
lifting and ensure they are fi rmly secured once
installed.
This front facing does not replace the main glass door.
Do not operate without the main glass door installed.
The front facing can sit fl ush with a counter, fl oor, or
hearth.
3. Hook the bottom
of the front facing
5
on the bottom lip of
the fi rebox. Pivot the
front facing against
the fi rebox and insert
the head of the turn
button
7 through the
slot in the front facing.
(FIGURE 48) Secure
by turning the head
of the turn button 1/4
turn.
FIGURE 46
2. Install the turn button 7 to the face of the fi rebox using
the 2 fl at head screws supplied.
FIGURE 50
FIGURE 51
FIREBOX
7
FIGURE 48
FIGURE 49
FIGURE 47
FIGURE 45