Nikon 4.2 - Manual (Page 33)

31
Device Registration: D2-Series/D100/D70/COOLPIX-Series Cameras
Windows 98 Second Edition (SE)
The following ex pla na tion uses D100 as an ex am ple.
After in stall ing Nikon Capture 4 and re start ing
the computer, connect your camera to the
com put er using a USB ca ble and turn the
cam era on. The cam era will be reg is tered
au to mat i cal ly.
Follow the instructions below to check that the camera has been cor rect ly reg is tered with the
system.
Step 1
Right-click the My Com put er icon on the
desk top and select Prop er ties from the menu
that appears. The System Prop er ties dialog will
be dis played. Click the Device Manager tab.
Step 2
After confi rming that Disk drives, Hard disk
controllers, and Uni ver sal Se ri al Bus con-
trol lers are listed in the Device Man ag er tab,
click the plus sign (+) next to each of these
device types.
Before Connecting the Camera
Be sure to install Nikon Capture 4 before con nect ing your camera to the com put er.