3) turning on the projector, Turning on the projector – NEC M350X User Manual
Page 26
16
2. Projecting an Image (Basic Operation)
Standby
Blinking
Power On
Steady orange light
Blinking blue light
Steady blue light
Turning on the Projector
1. Uncover the lens by sliding the lens cover (M350X/
M300X/M260X/M230X/M300W/M260W/M420X/M420XV)
or removing the lens cap (M350XS/M300XS/M260XS/
M300WS/M260WS)
[M350XS/M300XS/M260XS/M300WS/M260WS]
• Do not remove the lens cap by pulling on the string.
Doing so can cause mechanical damage to the part
around the lens.
2. Press the
(POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• When the message “Projector is locked! Enter your password.”
is displayed, it means that the [SECURITY] feature is turned on.
(
→ page
)
After you turn on your projector, ensure that the computer
or video source is turned on and that the lens cover is
open.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
(
→ page
)
Lens cover
Lens cap