Nikon Coolpix P300 - Manual (Page 82)

70
Adjusting Brightness, Vividness and Hue ( A, B, C, D Modes)
More on
Sh
ooting
2
Adjust
o brightness, G vividness, or F hue.
• The rotary multi selector is used as follows.
– HI: The slider moves. The effect can be adjusted
while confirming the results on the monitor. The
effect can also be adjusted by rotating the command
dial.
– J K: Switches among brightness (exposure
compensation), vividness and hue. The items can also
be switched by rotating the rotary multi selector.
• For more information on each item, see the following.
– “Adjusting Brightness (Exposure Compensation)” (
A71)
– “Adjusting Vividness (Saturation Adjustment)” ( A71)
– “Adjusting Hue (White Balance Adjustment)” (
A71)
• To turn off the effects of the creative slider, press J or K to choose P, and press the
k button.
3
When adjustment is complete, press
J or K
to choose y and press the
k button.
• If the k button (except when P is selected) or the
shutter-release button is pressed in step 2, the selected
amount of effect is applied. When the effect is applied,
the camera returns to the shooting screen.
• If brightness is adjusted, H and the compensation
value are displayed.
• If vividness is adjusted, a is displayed.
• If hue is adjusted, b is displayed.
4
Press the shutter-release button to take a picture.
+0.3
0.0 0.0
Brightness (Exp. +/-)
Slider
Exit
+0.3 +0.3
1342 1342 1342 1/250 1/250 1/250 F5.6 F5.6 F5.6
C
Creative Slider Settings
The settings for brightness (exposure compensation), vividness and hue are saved in the camera‘s
memory even when the camera is turned off.