Nikon Coolpix P300 User Manual
Page 185
173
Error Messages
T
ec
h
n
ical
No
tes an
d I
n
de
x
N
Raise the flash.
The flash is lowered
when the scene mode
is o (Backlighting)
and HDR is Off or
Night portrait.
Slide the
K (flash pop-up) control
to raise the flash.
N
The flash is lowered.
The flash is not raised
during the Scene auto
selector mode.
Slide the
K (flash pop-up) control
to raise the flash. The camera can still
shoot normally with the flash lowered
if you do not wish to use it.
Lens error
Q
Lens is not operating
properly.
Turn camera off and then on again. If
error persists, contact retailer or
Nikon-authorized service
representative.
P
Communications error
Error occurred during
communication with
printer.
Turn off camera and reconnect USB
cable.
System error
Q
Error has occurred in
camera’s internal
circuitry.
Turn off camera , remove and reinsert
battery, and turn on camera. If the
error persists, contact retailer or
Nikon-authorized service
representative.
PR
Printer error: check
printer status.
Printer error
Check printer. After solving the
problem, select Resume and press
the
k button to resume printing.*
-
PR
Printer error: check paper
Specified size of paper
is not loaded.
Load the specified paper, select
Resume and press the
k button to
resume printing.*
-
PR
Printer error: paper jam
Paper has jammed in
the printer.
Remove the jammed paper, select
Resume and press the
k button to
resume printing.*
-
PR
Printer error: out of paper
No paper is loaded in
the printer.
Load the specified paper, select
Resume and press the
k button to
resume printing.*
-
Display
Description
Solution
A