Troubleshooting – NordicTrack NTS58740 User Manual
Page 19
19
TROUBLESHOOTING
CLEANING THE BAR GUIDES
Over time, dust may build up on the Bar Guides (55),
causing a squeaking noise as the resistance system
is used. If this occurs, wipe off the Bar Guides with a
damp cloth and a mild, non-abrasive detergent. Do not
use solvents.
55
110
ADJUSTING THE RESISTANCE
When the resistance setting changes, the motor will
be heard.
To prevent damage to the motor, do not
pull any of the cables while the resistance setting
is changing. If the motor has difficulty adjusting the
resistance level and no cable is being pulled, there
may be too much tension on the Upper Cable (110).
Adjust the tension as described below.
To decrease the tension on the Upper Cable (110),
turn the two 3/8” x 38mm Tension Screws (106) twice,
counterclockwise. Select the desired resistance set-
ting. Repeat this step if necessary.
106
- NTCCEX04902 (16 pages)
- C2200 NTL10905.3 (34 pages)
- Viewpoint 3000 30704.0 (40 pages)
- GRT500 (25 pages)
- 2200 R NTL1595.1 (34 pages)
- NTL07806.0 (32 pages)
- 4500 R (20 pages)
- NTL24821 (34 pages)
- NTL10805.1 (34 pages)
- NTBE01490 (12 pages)
- NTL07707.2 (32 pages)
- 30510.2 (28 pages)
- STRENGTH ADJUSTABLE BENCH NTB12920 (12 pages)
- 831.298800 (26 pages)
- NEL07940 (24 pages)
- NTBE01100 (12 pages)
- NTL18530 (38 pages)
- NTEL79010 (24 pages)
- AudioStrider NTEL7906.0 (28 pages)
- 5600 R NTL18940 (34 pages)
- NTL17940 (34 pages)
- NTTL25905 (34 pages)
- NEL7095.1 (28 pages)
- NTEL08991 (20 pages)
- NTL24820 (34 pages)
- NTL14010.0 (40 pages)
- 4200 R (20 pages)
- NTL12940 (34 pages)
- NTB58030 (19 pages)
- NTEL12910 (24 pages)
- NTTL90081 (26 pages)
- NTTL09993 (30 pages)
- NTEL59012 (24 pages)
- CTL8500 (45 pages)
- 5500 R NTL19940 (38 pages)
- NTSY06990 (25 pages)
- NTL15922 (34 pages)
- NETL15520 (34 pages)
- E3000 NTL17950 (34 pages)
- AUDIOSTRIDER 800 NTEL7706.1 (24 pages)
- A2350 NTL07007.1 (36 pages)
- NTL12942 (34 pages)
- NTL11920 (34 pages)
- 30702.0 (32 pages)
- NTTL11990 (34 pages)