National Instruments NI USB-9219 - Manual (Page 21)

© National Instruments Corporation 21 NI USB-9219 User Guide and Specifications
Excitation level for Half-Bridge and Full-Bridge modes
Excitation level for Resistance, RTD, and Quarter-Bridge modes
Power Requirements
Current consumption from USB ............ 500 mA, max
Suspend mode ................................. 2.5 MA, max
Bus Interface
USB specification ........................... USB 2.0 Hi-Speed
Physical Characteristics
Spring-terminal wiring ........................... 18 to 28 AWG copper conductor
wire with 7 mm (0.28 in.) of
insulation stripped from the end
Weight .................................................... 258 g (9.1 oz)
Mode Load Resistance ( Ω) Excitation (V)
Half-Bridge 700 2.5
Half-Bridge 240 2.0
Full-Bridge 350 2.7
Full-Bridge 120 2.2
Load Resistance (
Ω)
Excitation (mV)
120 50
350 150
1,000 430
10,000 2,200