Nokia 2366i - Manual (Page 90)

M e s s a g i n g
89
Listen to voice messages
After you set up voice mail, in the standby mode, press and
hold 1; or select
Menu > Messaging > Voice messages > Listen
to voice messages to dial the voice mailbox number. When you
connect and the pre-recorded greeting begins, follow the
automated instructions to listen to your voice messages.
Dial phone numbers in automated systems
Pauses are used for automated voice systems such as banks,
voice mail, or calling cards. Insert a pause after a phone number,
then enter another group of numbers. The second set of
numbers is dialed automatically after the pause. This feature
is used for dialing into systems that require a code.
To set up dialing codes, do the following:
1. Select Menu > Contacts > 1-touch dialing .
2. Scroll to an (empty) 1-touch dialing slot, and select Assign .
3. Enter the phone number, including the area code.
4. Enter any dialing codes as necessary after the entered
phone number.
For example, if you pause for 5 seconds after connecting
to a bank, enter p twice (two times 2.5 seconds) after the
bank number: 2145551212pp.
5. Enter any remaining pauses or other information that
enables you to listen to the information you want, and
select
OK
6. Enter a name (such as bank), and select OK .
To dial and listen to information, press and hold the assigned
1-touch dialing key in the standby mode.