Nokia 2366i - Manual (Page 44)

S e t t i n g s
43
3. If necessary, select an option associated with that function.
4. Select Start , and speak the voice tag clearly into the
microphone. Do not select Quit unless you want to
cancel the recording.
The device replays and saves the recorded tag. appears
next to commands with assigned voice tags.
Activate a voice command
After you have associated a voice tag with a function in your
device, to issue a command, speak the voice tag.
1. In the standby mode, press and hold the right soft key.
2. With Speak now displayed, pronounce the voice tag clearly
into the microphone.
With the voice tag found, the device displays Found: , and plays
the recognized voice tag through the earpiece. The function
you requested is activated.
Options
After you have associated a voice tag to a command, you can
select one of the following options:
Playback —Press the center soft key to listen to the voice
command tag.
Change —Select Options > Change to change the
voice command.
Delete —Select Options > Delete to erase the voice
command tag.
■ Connectivity
You can connect the phone to a compatible device using a
Bluetooth wireless connection.