Ip parameters (default profile) screen, Ip parameters (default profile) screen -8, This scr – Netopia R7200 User Manual
Page 64
8-8 User’s Reference Guide
IP parameters (default profile) screen
If you are using RFC1483 datalink encapsulation, the IP Parameters (Default Profile) screen allows you to
configure various IP parameters for SDSL connections established without an explicitly configured connection
profile:
For an SDSL link, Network Address Translation (NAT) is disabled by default in the Default Profile. You can enable
it by toggling to Yes. For details on setting up IP Parameters see
“IP Setup and Network Address Translation” on
.
IP Parameters (Default Profile)
Address Translation Enabled: No
Filter Set (Firewall)...
Remove Filter Set
Receive RIP: Both
Transmit RIP: Off
Return/Enter accepts * Tab toggles * ESC cancels.