Netopia R7200 - Manual (Page 108)

10-26 User’s Reference Guide
DHCP NetBIOS Options
If your network uses NetBIOS, you can enable the Netopia R7200 to use DHCP to distribute NetBIOS
information.
NetBIOS stands for Network Basic Input/Output System. It is a layer of software originally developed by IBM
and Sytek to link a network operating system with specific hardware. NetBIOS has been adopted as an industr y
standard. It offers LAN applications a variety of “hooks” to carr y out inter-application communications and data
transfer. Essentially, NetBIOS is a way for application programs to talk to the network. To run an application that
works with NetBIOS, a non-IBM network operating system or network inter face card must offer a NetBIOS
emulator. Many vendors either provide a version of NetBIOS to inter face with their hardware or emulate its
transpor t layer communications ser vices in their network products. A NetBIOS emulator is a program provided
by NetWare clients that allow workstations to run applications that suppor t IBM’s NetBIOS calls.
■ Select DHCP NetBios Options and press Return. The DHCP NetBIOS Options screen appears.
■ To ser ve DHCP clients with the type of NetBIOS used on your network, select Serve NetBios Type and
toggle it to Yes.
DHCP NetBios Options
Serve NetBios Type: Yes
NetBios Type... Type B
Serve NetBios Scope: No
NetBios Scope:
Serve NetBios Name Server: No
NetBios Name Server IP Addr: 0.0.0.0
Configure DHCP-served NetBIOS options here.