Netopia R7200 - Manual (Page 27)

Connecting to Your Local Area Network 4-5
Adding an external modem
You may want to add an external modem to your Auxiliar y por t. Obtain the special DB-25 external modem cable
(TE6/DB25) either from your reseller or directly from Netopia.
Netopia R7200 Auxiliary port for connecting an external modem
By default, the Auxiliar y por t on your Netopia R7200 is enabled for remote console configuration via an external
asynchronous modem. This means that all you have to do is connect your modem to the Auxiliar y por t and
configure its settings in the Line Configuration screens under the WAN Configuration menu.
For pinout information on the HD-15 to DB-25 modem cable, see “Pinouts for Auxiliar y por t modem cable,” in
Appendix F, “Technical Specifications and Safety Information.”
Macintosh
PC
PC
10Base-T
Hub
Ethernet
Nor-
8
1
If you add devices connected
through a hub, connect the hub to
Ethernet por t number 1 on the
Netopia R7200 SDSL Router and
set the Normal/Uplink crossover
switch to Uplink.
Auxiliar y connection por t
HD-15 (female)
Ethernet
Normal
Auxiliary Console Power Line
8
1
1
Uplink