Netopia R7200 User Manual
Page 41
Setting up your Router with the SmartStart Wizard 5-13
Using Classic Networking (MacTCP)
1.
Go to the Apple Menu. Select Control Panels and then Network.
2.
In the Network window, select EtherTalk.
3.
Go back to the Apple menu. Select Control Panels and then MacTCP.
4.
Select EtherTalk.
From the pull-down menu under EtherTalk, select an available zone; then click the More button.
In the MacTCP/More window select the Server radio button. If necessar y, fill in the Domain Name Ser ver
information given to you by your administrator.
5.
Restar t the computer.
Note: More information about configuring your Macintosh computer for TCP/IP connectivity through a Netopia
R7200 can be found in Technote NIR_026, “Open Transpor t and Netopia Routers,” located on the Netopia Web
site.