New Holland Crop-Chopper 38 - Manual

New Holland
Crop-Chopper
®
Flail Harvester
38
Page 1 of 1
MODEL 38
Width, in transport, ft. in. (m) 9’8” (2.94)
Width, in operation, ft. in. (m) 10’10” (3.30)
Height, overall, ft. in. (m) 10’2” (3.09)
Length, overall, ft. in. (m) 10’4” (3.15)
Weight, lbs. (kg) 2,020 (898)
Cutting width, in. (m) 72 (1.83m)
Cutting height, in. (mm) 2 to 7 (50 to 180)
Rotor speed, rpm 1,373
Rotor flails 40
Cutterhead knives 3 standard
Cutterhead paddles Cupped
Cutterhead speed, rpm 966
Number of paddles 3
Adjustable Hitch 2 positions
Drive, rpm 540 PTO with yoke and safety shield
Overload Protection Slip and overrunning clutches and shearbolt
Tires 27x7.50-15
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).