Nortel Networks COOLPIX S80 - Manual (Page 37)

25
Step 1 Turn the Camera On and Select G Easy Auto Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: G
(Easy Auto) Mode
Indicators Displayed in G (Easy Auto) Mode
To reactivate the monitor after it is turned off by the power saving function in
standby mode (
A 155), press the shutter-release button.
B
Note on Touch Shutter
At the default setting, the shutter can be released by simply tapping a subject in the monitor
(
A 41). Take care that you do not release the shutter accidently.
B
Note on Printing Pictures
When printing pictures taken at an Image mode setting of p 3968×2232 (default setting), the
edges of pictures may be cropped, preventing printing of complete pictures (
A 138).
D
Functions Available in G (Easy Auto) Mode
• When the camera is pointed at a human face, the face detection function, with which the camera
automatically detects that face and focus on it, activates ( A 28, 49).
• Shooting settings (A 32) can be changed by tapping the left or bottom tab to display the setting
controls ( A 12).
D
Vibration Reduction
• See “g Vibration Reduction” (A 153) in the setup menu (A 145) for more information.
• Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
36 36 36
W
T
Shooting mode
In easy auto mode, G,
e, f, g, h, j,
or i is displayed to
indicate the shooting
mode selected by the
camera for the current
subject and framing.
Internal memory indicator
Indicates that images will be stored in the camera’s internal memory (approximately
79 MB). When a memory card is inserted, C is not displayed and pictures will be
stored to memory card.
Vibration reduction
The effects of camera
shake are reduced.